Diamon-Fusion?

Overview: While Diamon-Fusion? does make treated surfaces water repellent and stain resistant, some maintenance is still necessary.

Diamon-Fusion? is similar to the development of Teflon? for cooking pans. While you can cook food in uncoated pans, it is much easier to clean if you cook with non-stick coatings. If you burn certain foods in pans without non-stick coating, it often means that you must throw the pan away. Those same foods when cooked in a coated pan, clean up rather easily. The same is true with Diamon-Fusion? on glass or glazed surfaces. It is important to understand that you must maintain the Diamon-Fusion? coating though the time and effort required are dramatically reduced, like Teflon? vs. non-coated pans. The warmer and dirtier the water, the greater the surface tension and spotting. Thus shower doors require more maintenance than exterior windows.

It is not necessary to use abrasive scrubbers or expensive and caustic chemicals.

On shower doors: Pour cool water along the top edge of the glass and most of the soapy residue will run right off. A small, dry washcloth will dry the few drops of water that gravity hasn’t removed. If you don’t pour the water over the glass each time – that’s not a problem. You can go two or three days without being concerned about maintenance. However, if you ignore the maintenance, water spots will appear. The Diamon-Fusion? process makes the surface smoother, allowing spots to be removed much more easily even if you neglect to follow simple maintenance. You would not put away a pan, Teflon? coated or not, right after cooking in it unless you gave it a quick rinse and dry. That’s all you need – a wet cloth and a dry one to polish with. If you go weeks or months without the proper maintenance, depending on the water, you may use a wet body scrubber, like the ones you use with liquid body soaps, and lightly scrub away any build up.

Heavily stained glass: Should the glass become considerably stained from lack of regular maintenance, Diamon-Fusion’s? Ultimate Hard Water Stain Remover can be used to bring the surface back to its original sheen, in most cases, without damaging the Diamon-Fusion? coating. If you are interested in the Ultimate Hard Water Stain Remover, please contact us at (808) 676-3888.

• Diamon-Fusion is guaranteed to improve hydrophobic characteristics.
• Diamon-Fusion will not fade, discolor or peel off.
• Diamon-Fusion will protect surfaces and reduce maintenance time.
• Diamon-Fusion has a one year guarantee from the initial CVD.

Designed by Trade Publishing